{"title":"Home page","description":"","products":[{"product_id":"sy0-5-analog-drum-module","title":"SY0.5 Analog drum module","description":"\u003ch2\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch1\u003e\u003cbr\u003e\u003c\/h1\u003e\n\u003cbr\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003cp\u003eA faithful 1:1 recreation of a single channel of the Pearl Syncussion SY-1. The circuit uses all modern versions of original parts (all the opamps are still in production!) and equivalent parts for out of production parts.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/misw.us\/SY0.5_UserGuide_Dec2018.pdf\" target=\"_blank\"\u003eOperating Instructions\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e10 HP, 20mm Deep\u003c\/li\u003e\n\u003cli\u003eCurrent Draw: +12V 130 mA, -12V 20 mA\u003c\/li\u003e\n\u003cli\u003eOutput at eurorack levels\u003c\/li\u003e\n\u003cli\u003eCV modulation of Decay Time\u003c\/li\u003e\n\u003cli\u003eCV modulation of Filter Cutoff\u003c\/li\u003e\n\u003cli\u003eCV Modulation of OSC pitch\u003c\/li\u003e\n\u003cli\u003eCV input range +\/-5V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMode functionlity:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThere are two options for mode, one will advance the osc mode with a trigger in the direction it was last selected manually (up or down) or you can select the mode with a CV, 0-5V. You can toggle between these functions by long pressing both buttons\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePower header orientation\u003c\/strong\u003e: This the PSIpower scheme so\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003cu\u003ethere is no polarity on the power header\u003c\/u\u003e\u003c\/strong\u003e, either way is fine.\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003ciframe src=\"https:\/\/www.youtube.com\/embed\/xsZWMf7Bzkg\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Michigan Synthworks","offers":[{"title":"Natural Anodized Aluminum","offer_id":19676446982230,"sku":"SY_nat","price":315.0,"currency_code":"USD","in_stock":true},{"title":"Black Anodized Aluminum","offer_id":19676447014998,"sku":"SY_blk","price":315.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/products\/IMG_0539.jpg?v=1569500316"},{"product_id":"twist-6hp-warps","title":"Twist, 6HP Warps","description":"\u003cp\u003e6HP Micromodule of Opensource Warps.  Ships with Parasite firmware\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease direct any and all support questions to Mi Synth Works, NOT MUTABLE INSTRUMENTS. This is NOT an Mutable Product and under no circumstance do you need to bother them with anything related to it.\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePlease Note:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eThis device uses PSIpower and has\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-fragment=\"1\" data-mce-style=\"text-decoration: underline;\"\u003eNO POLAIRTY\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eon the power header, it can be installed\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-fragment=\"1\" data-mce-style=\"text-decoration: underline;\"\u003eEITHER WAY\u003c\/span\u003e\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/100.png?v=1552430123\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/jakplugg\"\u003eDerivative Panel, PCB \u0026amp; Schematic\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eprovided by Jakplugg under creative commons\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/creativecommons.org\/licenses\/by-sa\/3.0\/\"\u003eCC-BY-SA-3.0\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003elicense.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/pichenettes\/eurorack\"\u003eOriginal CAD file, PCB \u0026amp; Schematic and original design elements\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eprovided by Mutable Instruments under creative commons\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/creativecommons.org\/licenses\/by-sa\/3.0\/\"\u003eCC-BY-SA-3.0\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003elicense.\u003c\/p\u003e","brand":"Michigan Synthworks","offers":[{"title":"natural","offer_id":19677387980886,"sku":"twist_nat","price":179.0,"currency_code":"USD","in_stock":false},{"title":"black","offer_id":19677388013654,"sku":"twsit_blk","price":179.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/products\/Twist2020Nat.png?v=1595431686"},{"product_id":"midi-din-male-to-3-5mm-trs-male-1-5m-type-a-wiring","title":"Midi DIN Male to 3.5mm TRS Male, 2m, TYPE A Wiring","description":"Molded TRS MIDI A to DIN MIDI cable.  2m length.  \u003cstrong\u003eUSB TYPE A WIRING\u003c\/strong\u003e","brand":"Michigan Synth Works","offers":[{"title":"Default Title","offer_id":29767777910870,"sku":"cbl_TRSMIDI","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/products\/IMG_2139.JPG_176c5efc-c025-44eb-b821-99fc5d36f5c4.jpg?v=1639577939"},{"product_id":"neutron-sound-qat-quad-attenuverter","title":"Neutron Sound QAT Quad Attenuverter","description":"\u003cp\u003e\u003cspan\u003eNeutron QAT is a 8HP, 4 channel attenuverter with switchable linear or audio taper potentiometer response. individual,pre and post attenverter mix outputs are available. Red\/Green LEDs\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePlease Note:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eThis device uses PSIpower and has \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\" data-mce-fragment=\"1\"\u003eNO POLAIRTY\u003c\/span\u003e on the power header, it can be installed \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\" data-mce-fragment=\"1\"\u003eEITHER WAY\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Michigan Synth Works","offers":[{"title":"Default Title","offer_id":31030679470166,"sku":"QAT","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/products\/IMG_0776.jpg?v=1579807614"},{"product_id":"neutron-sound-qvca-quad-vca","title":"Neutron Sound QVCA Quad VCA","description":"\u003cp\u003e\u003cspan\u003eNeutron QVCA is an 8HP, 2164 based channel VCA with switchable linear or log response. The audio and CV inputs are chain normalized from 1 to 4. Red LEDs. DC Coupled inputs\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePlease Note:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eThis device uses PSIpower and has \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\" data-mce-fragment=\"1\"\u003eNO POLAIRTY\u003c\/span\u003e on the power header, it can be installed \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\" data-mce-fragment=\"1\"\u003eEITHER WAY\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Michigan Synth Works","offers":[{"title":"Default Title","offer_id":31030697099350,"sku":"QVCA","price":160.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/products\/IMG_0775.jpg?v=1579809439"},{"product_id":"8m-fader-bank-with-cv-i2c-and-midi","title":"F8R 8 Channel Fader Bank with CV, I2C, and MIDI","description":"\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003ch2\u003e*NEW* 2.1 Firmware!  (Feb 2024)\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Resolution mode for MIDI! 14bit Pitchbend on channels 1-8\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e: The new firmware must installed using the double-press of the reset button on the back of the module.  The \"reboot to bootloader\" option on the editor is ONLY available for devices running 2.1 or later firmware.  With the High Resolution mode enabled, BOTH TRS and USB MIDI send pitchbend on channels 1-8 and whatever CC mappings are assigned on the editor are disabled.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\n\u003ca href=\"https:\/\/misw.us\/\/firmware\/f8rxvi\/latest\/f8rxvi.latest.uf2\"\u003eDownload the 2.1 firmware\u003c\/a\u003e \u003cstrong\u003eNew Feb 2024\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eOnline parameter editor:\u003c\/span\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e \u003c\/span\u003e\u003ca title=\"http:\/\/misw.us\/editor\" href=\"https:\/\/misw.us\/editor\" style=\"font-size: 0.875rem;\"\u003ehttps:\/\/misw.us\/editor\u003c\/a\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e \u003cbr\u003eTo connect to the web editor, open the web page in a WebMIDI compatible browser, THEN connect the USB cable to the device.  It will take several seconds to connect.\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eF8R is a 8 channel, 16hp control surface for Eurorack\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLong throw LED 60mm faders\u003c\/li\u003e\n\u003cli\u003e0-5V, 0-10V, -5 to +5V CV ranges per channel\u003c\/li\u003e\n\u003cli\u003eFully analog CV outputs\u003c\/li\u003e\n\u003cli\u003eI2C communications as leader or follower \u003c\/li\u003e\n\u003cli\u003eMIDI header for one output channel on the back of the device\u003c\/li\u003e\n\u003cli\u003eI2C, MIDI, and CV can be used simultaneously\u003c\/li\u003e\n\u003cli\u003eAvailable expander with additional midi and i2c outs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca style=\"color: #ff2a00;\" href=\"https:\/\/michigansynthworks.com\/collections\/other-hardware\/products\/20cm-long-3-pin-cable-for-i2c-or-midi-connections-on-f8r\"\u003eDont forget to order an I2C\/MIDI cable if you need one!\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eGreen LED for Natural Panel, Red for Black Panel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\n\u003cbr\u003e\u003ca href=\"https:\/\/michigansynthworks.com\/products\/exp-f8r-xvi-eurorack-expander-usb-c-midi-i2c\"\u003eExpander Available which adds 3 Midi outputs, 3 I2C ports\u003c\/a\u003e\n\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eI2C:\u003c\/strong\u003e Default State: Follower, Default Address: 0x31\u003c\/p\u003e\n\u003cp\u003e16HP Width, 20mm Depth\u003cbr\u003eCurrent Draw: +12V 50 mA, -12V 40 mA\u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePlease Note:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eThis device uses PSIpower and has\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-fragment=\"1\"\u003eNO POLAIRTY\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eon the power header, it can be installed\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\" data-mce-fragment=\"1\"\u003eEITHER WAY\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\n\u003cstrong\u003eBasic Usage instructions:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eFront:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVoltage Select switches:  \u003c\/strong\u003eIndependent for each channel. Does NOT affect MIDI\/I2C data\u003c\/p\u003e\n\u003cp\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eRear:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower Header:\u003c\/strong\u003e Standard 10pin power cable, there is NO polarity for this connection.  It can be connected either way\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/power_480x480.png?v=1588076884\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eMIDI Out Header:\u003c\/strong\u003e\u003c\/span\u003e This is a 4 pin header but only 3 or 2 connections need to be used.  To connect to a DIN cable, either GND, 5 (to pin 5, current sink\/aka -), and 4 (to pin 4, current source\/aka +) should be used.  For internal module to module connections, only pin 4 and 5 should be used.  The ground pin is only for the shield in a midi cable, it is never connected on a midi input and isnt necessary for the short module to module lengths\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/midi_480x480.png?v=1588077371\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eI2C Header:\u003c\/strong\u003e\u003cspan\u003e 3 pin header to connect to other I2C devices in your rack, this is an unbuffered connection so cable lengths should be as short as possible (20cm\/6\" recommended).  There are 4.7k pull up resistors on this connection\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/i2c_480x480.png?v=1588077533\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnector for Expander:\u003c\/strong\u003e\u003cspan\u003e This connects the F8R to the I\/O expander.  The cable is attached to the expander.  Note the keyway at the top of the part, the connecter will ONLY connect one way\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/exp_480x480.png?v=1588635063\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch1\u003e\u003cstrong\u003eFIRMWARE UPDATES:\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003eCurrent Firmware Version: 2.1\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFirmware update procedure: \u003c\/strong\u003eOpen the web editor, press the \"Reboot to bootloader\", a drive will appear on your computer, copy the UF2 file to that drive.  It will close automatically\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFirmware update procedure pre 2.1 firmware: \u003c\/strong\u003e Connect the Mini USB to your computer, power up the module via eurorack power and press the reset button on the back of the module twice (quickly).  A new drive will appear on your computer, simply copy the firmware file to that drive (it will give you a warning about copying a file without properties) and thats it.  The drive will disappear once the file is copied and the module will reboot with the new firmware.\u003c\/p\u003e\n\u003cp\u003eThe firmware is now unified for F8R and XVI, to identify the device as F8R, DIP switches must ALL BE OFF\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTHE DIP SWITCH IS NOW DEPRCIATED, ALL FUNCTIONS IT SERVED ARE NOW DONE VIA WEB EDITOR. Mid 2021+ Devices do NOT have this switch\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eIMPORTANT NOTE FOR USERS THAT DO NOT HAVE A RESET BUTTON ON THE DEVICE OR ARE RUNNING FIRMWARE VERSIONS LOWER THAN 1.0 (It says on the  box), Please contact Michigan Synth Works for update procedure\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVersion History:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e1.03 fixed midi channel on fader one set to channel 2\u003c\/p\u003e\n\u003cp\u003e1.02 Migrated code to new bootloader\u003c\/p\u003e\n\u003cp\u003e2.0 New codebase.  Ardunio is no longer supported\u003c\/p\u003e\n\u003cp\u003e2.1 Added High Resolution option for MIDI out\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cb style=\"color: #000000;\"\u003eOpen Source \u003c\/b\u003e\u003cspan style=\"color: #000000;\" color=\"#000000\"\u003e\u003cb\u003eLicenses\u003c\/b\u003e\u003c\/span\u003e\u003cb style=\"color: #000000;\"\u003e:\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003ca href=\"https:\/\/github.com\/adafruit\/uf2-samdx1\"\u003eUF2 Bootloader \u003c\/a\u003edesigned by Adafruit Industries and released under the \u003ca href=\"https:\/\/opensource.org\/licenses\/MIT\"\u003eMIT License\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003ePortions of the code used for this device come from the \u003ca href=\"https:\/\/github.com\/16n-faderbank\/16n\"\u003e16n Faderbank\u003c\/a\u003e\u003cspan\u003e by \u003c\/span\u003e\u003ca href=\"https:\/\/github.com\/tehn\"\u003eBrian Crabtree\u003c\/a\u003e\u003cspan\u003e, \u003c\/span\u003e\u003ca href=\"https:\/\/github.com\/infovore\"\u003eTom Armitage\u003c\/a\u003e\u003cspan\u003e, and \u003c\/span\u003e\u003ca href=\"https:\/\/github.com\/bpcmusic\"\u003eBrendon Cassidy\u003c\/a\u003e  released under the \u003ca href=\"https:\/\/opensource.org\/licenses\/MIT\"\u003eMIT License\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Michigan Synthworks","offers":[{"title":"Natural Jacks on top \/ Yes","offer_id":31775027658838,"sku":"f8r_nat_GREEN","price":215.0,"currency_code":"USD","in_stock":true},{"title":"Natural Jacks on top \/ No","offer_id":43588122083414,"sku":null,"price":230.0,"currency_code":"USD","in_stock":true},{"title":"Black Jacks on top \/ Yes","offer_id":31775027691606,"sku":"f8r_blk_RED","price":215.0,"currency_code":"USD","in_stock":false},{"title":"Black Jacks on top \/ No","offer_id":43588122116182,"sku":null,"price":230.0,"currency_code":"USD","in_stock":true},{"title":"Natural Jacks on Bottom \/ Yes","offer_id":31775088476246,"sku":"f8r_nat_GREEN_btm","price":215.0,"currency_code":"USD","in_stock":true},{"title":"Natural Jacks on Bottom \/ No","offer_id":43588122148950,"sku":null,"price":230.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/products\/042_60cacb2e-5877-4271-9fa5-dccf6dc4e297.jpg?v=1673876664"},{"product_id":"xvi-16-channel-fader-bank-with-cv-i2c-and-midi","title":"XVI Euro 16 Channel Fader Bank with CV, I2C, and MIDI","description":"\u003ch2\u003e*NEW* 2.1 Firmware!  (Feb 2024)\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Resolution mode for MIDI! 14bit Pitchbend on channels 1-16\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e: The new firmware must installed using the double-press of the reset button on the back of the module.  The \"reboot to bootloader\" option on the editor is ONLY available for devices running 2.1 or later firmware.  With the High Resolution mode enabled, BOTH TRS and USB MIDI send pitchbend on channels 1-16 and whatever CC mappings are assigned on the editor are disabled.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\n\u003ca href=\"https:\/\/misw.us\/\/firmware\/f8rxvi\/latest\/f8rxvi.latest.uf2\"\u003eDownload the 2.1 firmware\u003c\/a\u003e \u003cstrong\u003eNew Feb 2024\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eOnline parameter editor:\u003c\/span\u003e\u003ca style=\"font-size: 0.875rem;\" href=\"https:\/\/misw.us\/editor\" title=\"http:\/\/misw.us\/editor\"\u003ehttps:\/\/misw.us\/editor\u003c\/a\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cp\u003eTo connect to the web editor, open the web page in a WebMIDI compatible browser, THEN connect the USB cable to the device.  It will take several seconds to connect.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eThis device uses PSIpower and has \u003cspan style=\"text-decoration: underline;\"\u003eNO POLAIRTY\u003c\/span\u003e on the power header, it can be installed \u003cspan style=\"text-decoration: underline;\"\u003eEITHER WAY\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cbr\u003e\u003c\/h2\u003e\n\u003ch2\u003eXVI is a 16 channel, 44hp control surface for Eurorack\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLong throw LED 60mm faders\u003c\/li\u003e\n\u003cli\u003e0-5V, 0-10V, -5 to +5V CV ranges per channel\u003c\/li\u003e\n\u003cli\u003eMicro USB connection, class compliant MIDI Device\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFully analog CV outputs\u003c\/li\u003e\n\u003cli\u003eI2C communications as leader or follower\u003c\/li\u003e\n\u003cli\u003eUSB MIDI and TRS B MIDI can be used\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003esimultaneously with different mappings in 7bit mode\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eI2C, MIDI, and CV can be used simultaneously\u003c\/li\u003e\n\u003cli\u003eDifferent color LEDs available separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch2\u003e\n\u003cspan style=\"color: #ff2a00;\"\u003e \u003cstrong\u003e\u003ca href=\"https:\/\/michigansynthworks.com\/collections\/other-hardware\/products\/20cm-long-3-pin-cable-for-i2c-or-midi-connections-on-f8r\" style=\"color: #ff2a00;\"\u003eDont forget to order an I2C\/MIDI cable if you need one!\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eI2C:\u003c\/strong\u003e Default State: Follower, Default Address: 0x31\u003c\/p\u003e\n\u003cp\u003e44HP Width, 20mm Depth\u003cbr\u003eCurrent Draw: +12V 90 mA, -12V 80 mA\u003c\/p\u003e\n\u003cp\u003ePlease note: Device MUST be powered by the eurorack power, it is \u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eNot USB Powered.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003e\n\u003cstrong\u003eBasic Usage instructions:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eFront:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVoltage Select switches:  \u003c\/strong\u003eIndependent for each channel. Does NOT affect MIDI\/I2C data\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eRear:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower Header:\u003c\/strong\u003e Standard 10pin power cable, there is NO polarity for this connection.  It can be connected either way.  the USB5V header is not used in the euro configuration of the device\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/XVI_Power_Header_480x480.png?v=1600437779\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eMIDI Out Header:\u003c\/strong\u003e\u003c\/span\u003e This is a 4 pin header but only 3 or 2 connections need to be used.  To connect to a DIN cable, either GND, 5 (to pin 5, current sink\/aka -), and 4 (to pin 4, current source\/aka +) should be used.  For internal module to module connections, only pin 4 and 5 should be used.  The ground pin is only for the shield in a midi cable, it is never connected on a midi input and isnt necessary for the short module to module lengths\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/XVI_Midi_mode_select_480x480.png?v=1600437773\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eI2C Header:\u003c\/strong\u003e\u003cspan\u003e 3 pin header to connect to other I2C devices in your rack, this is an unbuffered connection so cable lengths should be as short as possible (20cm\/6\" recommended).  There are 4.7k pull up resistors on this connection\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/XVI_I2C_Header_480x480.png?v=1600437766\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnector for Expander:\u003c\/strong\u003e\u003cspan\u003e This connects the XVI to the I\/O expander.  The cable is attached to the expander.  Note the keyway below the 1 in on the part, the connecter will ONLY connect one way\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/xvi_expansion_header_480x480.png?v=1600437747\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch1\u003e\u003cstrong\u003eFIRMWARE UPDATES:\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFirmware update procedure: \u003c\/strong\u003e Connect the Mini USB to your computer, power up the module and press the blue reset button on the back of the module twice (quickly).  A new drive will appear on your computer, simply copy the firmware file to that drive (it will give you a warning about copying a file without properties).  The drive will disappear once the file is copied and the module will reboot with the new firmware.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eUPGRADE INSTRUCTIONS FOR 1.xx Devices:\u003c\/p\u003e\n\u003cp\u003epress the reset twice with USB connected, copy the firmware file to the folder that pops up, it will confirm and the window will close automatically.\u003c\/p\u003e\n\u003cp\u003eThe firmware is now unified for F8R and XVI, to identify the device as XVI, DIP switch #4 must be switched to ON\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTHE DIP SWITCH IS NOW DEPRCIATED, ALL FUNCTIONS IT SERVED ARE NOW DONE VIA WEB EDITOR.  The ONLY function is serves now is to identify the unit as 16 channel instead of 8: if only 8 channels are showing up in the editor that means you did not switch DIP channel #4 to on. Mid 2021+ Devices not NOT have\u003cspan\u003e \u003c\/span\u003ethis\u003cspan\u003e \u003c\/span\u003eswitch\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/XVI_Reset_480x480.png?v=1600437786\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cb style=\"color: #000000;\"\u003eOpen Source \u003c\/b\u003e\u003cspan color=\"#000000\" style=\"color: #000000;\"\u003e\u003cb\u003eLicenses\u003c\/b\u003e\u003c\/span\u003e\u003cb style=\"color: #000000;\"\u003e:\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003ca href=\"https:\/\/github.com\/adafruit\/uf2-samdx1\"\u003eUF2 Bootloader \u003c\/a\u003edesigned by Adafruit Industries and released under the \u003ca href=\"https:\/\/opensource.org\/licenses\/MIT\"\u003eMIT License\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003ePortions of the code used for this device come from the \u003ca href=\"https:\/\/github.com\/16n-faderbank\/16n\"\u003e16n Faderbank\u003c\/a\u003e\u003cspan\u003e by \u003c\/span\u003e\u003ca href=\"https:\/\/github.com\/tehn\"\u003eBrian Crabtree\u003c\/a\u003e\u003cspan\u003e, \u003c\/span\u003e\u003ca href=\"https:\/\/github.com\/infovore\"\u003eTom Armitage\u003c\/a\u003e\u003cspan\u003e, and \u003c\/span\u003e\u003ca href=\"https:\/\/github.com\/bpcmusic\"\u003eBrendon Cassidy\u003c\/a\u003e  released under the \u003ca href=\"https:\/\/opensource.org\/licenses\/MIT\"\u003eMIT License\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Michigan Synthworks","offers":[{"title":"Natural Green LED \/ With LED Faders","offer_id":33082982989910,"sku":"XVIE_Nat_GR","price":249.0,"currency_code":"USD","in_stock":true},{"title":"Natural Green LED \/ Without LED Faders","offer_id":44206244986966,"sku":"XVIENONAT","price":274.0,"currency_code":"USD","in_stock":false},{"title":"Black Red LED \/ With LED Faders","offer_id":33082983120982,"sku":"XVIE_blk_GR","price":249.0,"currency_code":"USD","in_stock":true},{"title":"Black Red LED \/ Without LED Faders","offer_id":44206245019734,"sku":"xvienoblk","price":274.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/products\/2020-07-27005.jpg?v=1595889713"},{"product_id":"xvi-desktop-usb-16-channel-fader-bank-with-cv-i2c-and-midi","title":"XVI Desktop USB 16 Channel Fader Bank with CV, I2C, and MIDI","description":"\u003cdiv\u003e\n\u003ch2\u003e*NEW* 2.1 Firmware!  (Feb 2024)\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Resolution mode for MIDI! 14bit Pitchbend on channels 1-16\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Notes\u003c\/strong\u003e: The new firmware must installed using the double-press of the reset button on the back of the module.  The \"reboot to bootloader\" option on the editor is ONLY available for devices running 2.1 or later firmware.  With the High Resolution mode enabled, BOTH TRS and USB MIDI send pitchbend on channels 1-16 and whatever CC mappings are assigned on the editor are disabled.\u003c\/p\u003e\n\u003ch3\u003e\n\u003ca href=\"https:\/\/misw.us\/\/firmware\/f8rxvi\/latest\/f8rxvi.latest.uf2\"\u003eDownload the 2.1 firmware\u003c\/a\u003e \u003cstrong\u003eNew Feb 2024\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eOnline parameter editor:\u003c\/span\u003e\u003ca style=\"font-size: 0.875rem;\" href=\"https:\/\/misw.us\/editor\" title=\"http:\/\/misw.us\/editor\"\u003ehttps:\/\/misw.us\/editor\u003c\/a\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/h3\u003e\nTo connect to the web editor, open the web page in a WebMIDI compatible browser, THEN connect the USB cable to the device.  It will take several seconds to connect.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch2\u003eXVI Desktop is a 16 channel desktop control surface.  \u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLong throw LED 60mm faders\u003c\/li\u003e\n\u003cli\u003e0-5V, 0-10V, -5 to +5V CV ranges per channel\u003c\/li\u003e\n\u003cli\u003eUSB Powered (USB C, Cable included)\u003c\/li\u003e\n\u003cli\u003eFully analog CV outputs\u003c\/li\u003e\n\u003cli\u003eI2C communications as leader or follower\u003c\/li\u003e\n\u003cli\u003e1x Fully buffered I2C Port for longer cable runs. (3.5mm TRS)\u003c\/li\u003e\n\u003cli\u003eUSB MIDI and TRS A MIDI (can be used \u003cspan\u003esimultaneously with different mappings)\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eI2C, MIDI, and CV can be used simultaneously\u003c\/li\u003e\n\u003cli\u003eEnclosure is 220mmx125mmx31mm\u003c\/li\u003e\n\u003cli\u003eBlack case\/Red LEDS, White Case\/White LEDs.  LEDs are user replaceable,  different color LEDs available separately\u003c\/li\u003e\n\u003cli\u003eIncludes: XVI Desktop Unit, 1.5m USB C to USB A Cable, 1.5m TRS A Midi to MIDI Cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eItem Dimensions: 23cm x 12cm x 4cm\u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eIMPORTANT: This device requires a USC C 5V power supply which supplies 500mA or more (not included) for stand alone use.  It is NOT recommend for use with passive USB hubs, only powered ones.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eOther Important note:  As of Serial#4161, all devices have TRS MIDI A.   The spec has been official for a while now so all MiSW devices will conform to TRS MIDI A.  Both types of cables will be available in the shop\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\n\u003cstrong\u003eBasic Usage instructions:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eFront:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVoltage Select switches:  \u003c\/strong\u003eIndependent for each channel. Does NOT affect MIDI\/I2C data\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eBack I\/O:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUSB: \u003c\/strong\u003eUSB C connection for power and\/or connection to computer.  For use, simply connect to a 5V USB wall wart, 500 mA min (not included).  The device is a class compliant MIDI device and requires no drivers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eI2C: \u003c\/strong\u003eDefault State: Follower, Default Address: 0x31\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e\u003cu\u003e\u003c\/u\u003e\u003c\/b\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003ePCB Rear:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower backpack:\u003c\/strong\u003e This is the power supply for the device.  When converting to the eurorack configuration simply remove.  There is a standard 10pin power header below.\u003c\/p\u003e\n\u003cp\u003e \u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/xviBackpacl_480x480.png?v=1600437793\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e Includes 1.5m USB C Cable, 1.5m TRS A to DIN5 MIDI cable\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eThis device uses PSIpower and has\u003cspan\u003e \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\"\u003eNO POLAIRTY\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eon the power header, it can be installed\u003cspan\u003e \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\"\u003eEITHER WAY\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUPGRADE INSTRUCTIONS FOR 1.xx Devices:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/misw.us\/F8RXVI_V2_02.uf2\"\u003eDownload the 2.02\u003cspan\u003e \u003c\/span\u003efirmware\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eNew 1 November 2021\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003epress the reset twice with USB connected, copy the firmware file to the folder that pops up, it will confirm and the window will close automatically.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe firmware is now unified for F8R and XVI, to identify the device as XVI, DIP switch #4 must be switched to ON\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eTHIS REQUIRES OPENING THE UNIT TO ACCESS THE DIP SWITCH\u003c\/span\u003e, please contact Michigan Synth Works if you need assistance with opening the device.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTHE DIP SWITCH IS NOW DEPRCIATED, ALL FUNCTIONS IT SERVED ARE NOW DONE VIA WEB EDITOR.  The ONLY function is serves now is to identify the unit as 16 channel instead of 8: if only 8 channels are showing up in the editor that means you did not switch DIP channel #4 to on.  Mid 2021+ Devices do NOT have\u003cspan\u003e \u003c\/span\u003ethis\u003cspan\u003e \u003c\/span\u003eswitch\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003ch1\u003e\u003cstrong\u003eFIRMWARE UPDATES:\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFirmware update procedure: \u003c\/strong\u003e Connect the Mini USB to your computer and press the blue reset button on the back of the module twice (quickly), it is accessible through a small hole in the desktop version.  A new drive will appear on your computer, simply copy the firmware file to that drive (it will give you a warning about copying a file without properties).  The drive will disappear once the file is copied and the module will reboot with the new firmware.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/XVI_Reset_480x480.png?v=1600437786\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eCURRENT FIRMWARE VERSION: 2.03\u003c\/strong\u003e\u003c\/h2\u003e\n\u003ch3\u003e\u003cstrong\u003e \u003ca href=\"https:\/\/misw.us\/F8RXVI_V2_03.uf2\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAvailable Here\u003c\/span\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003ePLEASE NOTE, THE WEBSITE INCORRECTLY IDENTIFIES THE FIRMWARE VERSION, THE VERSION YOUR DEVICE SHIPPED WITH IS ON THE BOX LABEL \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cb style=\"color: #000000;\"\u003eOpen Source \u003c\/b\u003e\u003cspan color=\"#000000\" style=\"color: #000000;\"\u003e\u003cb\u003eLicenses\u003c\/b\u003e\u003c\/span\u003e\u003cb style=\"color: #000000;\"\u003e:\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003ca href=\"https:\/\/github.com\/adafruit\/uf2-samdx1\"\u003eUF2 Bootloader \u003c\/a\u003edesigned by Adafruit Industries and released under the \u003ca href=\"https:\/\/opensource.org\/licenses\/MIT\"\u003eMIT License\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003ePortions of the code used for this device come from the \u003ca href=\"https:\/\/github.com\/16n-faderbank\/16n\"\u003e16n Faderbank\u003c\/a\u003e\u003cspan\u003e by \u003c\/span\u003e\u003ca href=\"https:\/\/github.com\/tehn\"\u003eBrian Crabtree\u003c\/a\u003e\u003cspan\u003e, \u003c\/span\u003e\u003ca href=\"https:\/\/github.com\/infovore\"\u003eTom Armitage\u003c\/a\u003e\u003cspan\u003e, and \u003c\/span\u003e\u003ca href=\"https:\/\/github.com\/bpcmusic\"\u003eBrendon Cassidy\u003c\/a\u003e  released under the \u003ca href=\"https:\/\/opensource.org\/licenses\/MIT\"\u003eMIT License\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Michigan Synthworks","offers":[{"title":"White","offer_id":39734719512662,"sku":"XVID_WHT","price":299.0,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":40191847858262,"sku":"XVID_BLK","price":299.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/products\/PXL_20230223_175840188.jpg?v=1677176123"},{"product_id":"michigan-sy-1-analog-drum-synthesizer","title":"Michigan Synth Works SY-1 Analog drum Synthesizer","description":"\u003ch1\u003e \u003cbr\u003e\n\u003c\/h1\u003e\n\u003cp\u003eThe Michigan Synth Works SY-1 Drum synth is a full size, exact replica of the Pearl SY-1 Syncussion.  Every detail has been replicated from the original board layouts to the mechanical construction.  The assembled version has been modernized to use current manufacturing processes while still using the original board layouts and all parts have been carefully chosen to match the behavior of the original.  Case, boards, and I\/O Boards are all interchangeable with the original Pearl device\u003c\/p\u003e\n\u003cp\u003e Assembled versions come with the METAL back standard, the wood case is available as a DIY kit separately\u003c\/p\u003e\n\u003ch3\u003eThe Syncussion:\u003cbr\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThe Syncussion is a 2 voice drum synthesizer with two oscillators per voice and six different modes.  Five modes mix and modulate the oscillators plus a noise channel. Each voice has controls for TUNE, DECAY, SWEEP amount, SWEEP Speed, Sweep up\/off\/down, LFO amount, and LFO speed, LFO Shape (Tri or Square), and sample and hold\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eOSC Modes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eA: One oscillator sound, at this position the regular drum synthesizer sweep can be effected.\u003c\/p\u003e\n\u003cp\u003eB. Sound of one oscillator adjusting the other \u003cspan\u003eoscillator\u003c\/span\u003e frequency; produces a metallic sound.\u003c\/p\u003e\n\u003cp\u003eC. Sound of a mix of two oscillator outputs; sound is similar to that of a vibraphone.\u003c\/p\u003e\n\u003cp\u003eD. Sound of mix of two oscillator outputs; produces a low to high sweep and is done by hitting pad softly or hard; there is no connection to SWEEP SPEED and SWEEP RANGE\u003c\/p\u003e\n\u003cp\u003eE. Sound of one oscillator adjusting the other oscillator frequency with a mix of noise; produces a sound similar to hitting thin metal.\u003c\/p\u003e\n\u003cp\u003eF. Sound of only noise\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTriggering:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe SY-1 is designed to be triggered via drum triggers which output a very low pulse signal.  Modern 5V trigger signals (v-trig) can be used, how it i recommended experimenting with simple audio samples or more dynamic triggers.  One of the more interesting features of the Syncussion is the dynamic response to the drum triggers and just sending a straight pulse which maxes out the trigger inputs does not do the device justice.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eTuning:\u003cbr\u003e\u003c\/b\u003e\u003cbr\u003eThe original SY-1 uses a tune pedal to adjust the pitch of both oscillators while playing.  This functionality has been retained in the original configuration but is of limited use without the pedal.  The expanded version DOES have per voice CV control (1v\/Oct) as well as the MIDI \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Michigan Synth Works SY-1 is available in 3 different versions:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e1. Original I\/O Configuration:\u003c\/strong\u003e  The inputs and outputs use regular 1\/4\" Mono phone plugs:\u003cbr\u003e\u003cstrong\u003eTrig 1 In\u003c\/strong\u003e -  \u003cstrong\u003eTrig 2 In\u003c\/strong\u003e - \u003cstrong\u003eMute\u003c\/strong\u003e - \u003cstrong\u003eTune\u003c\/strong\u003e (via Tune pedal) - \u003cstrong\u003eMixed Output\u003cbr\u003e\u003cbr\u003e2. Expanded I\/O Configuration:\u003c\/strong\u003e The inputs and outputs use 1\/4\" Stereo to 1\/4\" (3 included) to greatly expand the capabilities of the device.  The Mod input is prewired to VCF freq but can easily be switched to decay via jumper on the voice cards\u003cbr\u003e\u003cstrong\u003eTrig 1,2 In\u003c\/strong\u003e\u003cspan\u003e -  \u003cstrong\u003eMod 1,2\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e In\u003c\/strong\u003e\u003cspan\u003e - \u003c\/span\u003e\u003cstrong\u003eMute\u003c\/strong\u003e\u003cspan\u003e - \u003c\/span\u003e\u003cstrong\u003eTune 1,2 CV in\u003c\/strong\u003e\u003cspan\u003e - \u003c\/span\u003e\u003cstrong\u003eOutput 1, 2\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/ModIOConnect.png?v=1686701568\" alt=\"\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3. MIDI equipped I\/O Configuration:\u003c\/strong\u003e \u003cspan\u003eThis is the same as the expanded i\/o configuration but adds MIDI in place of the MOD input.  The MIDI responds to velocity to gate level and pitch for each channel.  2 TRS-TS and TRS MIDI cables are included\u003c\/span\u003e\u003cbr\u003e\u003cstrong\u003eTrig 1,2 In\u003c\/strong\u003e\u003cspan\u003e -  \u003cstrong\u003eMIDI \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003eIn\u003c\/strong\u003e\u003cspan\u003e - \u003c\/span\u003e\u003cstrong\u003eMute\u003c\/strong\u003e\u003cspan\u003e - \u003c\/span\u003e\u003cstrong\u003eTune 1,2 CV in\u003c\/strong\u003e\u003cspan\u003e - \u003c\/span\u003e\u003cstrong\u003eOutput 1, 2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/MIDIConnectiondiagram.png?v=1686701676\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eMIDI Functions:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e16 Tigger levels controlled by MIDI Velocity: \u003c\/strong\u003eThe Sense potentiometers can be used to further adjust the trigger level from the MIDI to CV converter.  Plugging a jack into the trigger input will override the MIDI generated trigger\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4 Octave pitch: \u003c\/strong\u003eThe pitch CV functions as an offset to the Pitch slider so it is always a relative pitch, not absolute pitch.  \u003cspan\u003e Plugging a jack into the Tune input will override the MIDI generated Pitch\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMIDI Pitchbend\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModwheel to Filter frequency: \u003c\/strong\u003e4V (50%) possible modulation range to filter frequency as an offset to the filter frequency slider.  This can be used to extend the range of the filter up or down beyond what is possible with the slider alone\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMIDI Learn:  \u003c\/strong\u003eTo change the MIDI channel for CH1 or CH2, press the CH1 or CH2 sense pot on the back of the device twice quickly and play several notes on the MIDI channel you want to change to on your MIDI keyboard (the notes do not matter).  Once the new channel is accepted, it will trigger on that MIDI channel.  \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFirmware update: \u003c\/strong\u003ePower the SY-1 with the CH1 Sense potentiometer press, the trigger LEDs will alternate and you will hear the channels sound indicating that the device is ready to receive the update.  Send the SYSEX file using a midi utility of your choice, the trigger 1 LED will flash and the voice will sound indicating that it is receiving data.  When complete, the trigger LEDS will alternate.  Reboot the device to finish the update\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe SY-1 ships with a metal base panel but the DIY wood case can be used instead.  It is provided UNFINISHED and sold separately. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhats included:\u003cbr\u003eSY-1 Synthesizer\u003cbr\u003eUniversal Power adapter (100-240V, 12V DC out, Tip Positive)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExpanded I\/O: 3x 1.5m TRS 1\/4\" Phone to 2x TS 1\/4\" Phone \u003cbr\u003eMIDI I\/O: 2x 1.5m TRS 1\/4\" Phone to 2x TS 1\/4\" Phone, 1x 1.5M 3.5mm TRS to MIDI, 1x TRS 3.5mm to 1\/4\" TRS Adapter\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize: \u003cspan\u003e295x175x50, 1.5 kg\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/0rl4ZG727Ys\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/fV7HYcKrQYk\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/EB52n5KXYEU\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"Michigan Synth Works","offers":[{"title":"Original I\/O","offer_id":40158206132310,"sku":"SY1OG","price":550.0,"currency_code":"USD","in_stock":false},{"title":"Expanded I\/O","offer_id":40158206165078,"sku":"SY1EXP","price":600.0,"currency_code":"USD","in_stock":false},{"title":"MIDI","offer_id":40158206197846,"sku":"SY1MIDI","price":650.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/products\/SY1Top.png?v=1672592974"},{"product_id":"xvi-m","title":"XVI-M MIDI Controller, 16 Faders, 16 programmable buttons, 14bit resolution","description":"\u003ch2\u003e\u003cstrong\u003eXVI-M Desktop is a 16 channel desktop MIDI control surface.  \u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eNew!  No LED version available with high quality Alps faders\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e31 Jul 2025: No LED Option added\u003c\/p\u003e\n\u003cp\u003e5 Oct 2024: V1.03 Firmware released\u003c\/p\u003e\n\u003cp\u003e14 Feb 2024: V1.02 Firmware released\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/misw.us\/firmware\/xvim\/latest\/xvim.latest.uf2\"\u003e\u003cspan style=\"color: #ff00ff;\"\u003e\u003cstrong\u003eCURRENT FIRMWARE AVAILABLE HERE\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff00ff;\"\u003e\u003cstrong\u003eInstructions for updating from V1.0 at the bottom of this page\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLong throw LED 60mm faders\u003c\/li\u003e\n\u003cli\u003eUSB MIDI, MIDI TRS#1 and MIDI TRS#2 outputs\u003c\/li\u003e\n\u003cli\u003eUSB Powered (USB C, Cable included).  Stand alone power adapter available but NOT included\u003c\/li\u003e\n\u003cli\u003e14bit (MIDI Pitchbend) resolution faders.  Can be set to any 7 bit CC\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"https:\/\/misw.us\/EditorM\/\" target=\"_blank\"\u003eOnline parameter editor\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eFader output can be routed to USB MIDI, TRS MIDI A or TRS B\u003c\/li\u003e\n\u003cli\u003e3 color programmable button can be momentary, 1 state toggle, 2 state toggle, or 3 state toggle with each state sending a MIDI msg\u003c\/li\u003e\n\u003cli\u003eDurable metal case\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIncludes:\u003c\/p\u003e\n\u003cp\u003eXVI-M Control Surface\u003cbr\u003eUSB C to USB A cable (2m)\u003cbr\u003e1.5m TRS A to MIDI DIN cable\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eItem Dimensions: 23cm x 12cm x 4cm\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003e\u003cstrong\u003eOPERATING INSTRUCTIONS:\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cb\u003eOutputs: \u003c\/b\u003eXVI-M has 2 TRS A MIDI outs (MIDI 1 and 2) and USB MIDI which can double as a DC power jack when not used with a computer.  The LED on the back will light up green when device is sending on MIDI 1 and blue when sending on MIDI 2.  There is no LED indication of USB MIDI activity.  Any fader can be assigned to any output and all 3 can be used simultaneously with the limitation of each fader having only one output per channel (one fader cannot send to MIDI 1 and MIDI 2 simultaneously)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFader Operating modes: \u003cbr\u003e\u003cbr\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/options_9780ca96-6c2f-41b4-a206-2bfe71e021cc.png?v=1701991656\"\u003e\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eHigh Resolution mode (default):  \u003c\/b\u003eFaders transmit 14bit MIDI Pitchbend data on a single MIDI channel (Fader 1-16 send on MIDI channels 1-16 by default). Button follows the same MIDI channel as the fader. In high res mode, pitchbend is the only message that the fader will send at this time.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStandard Mode: \u003c\/strong\u003eFader transmits 7bit MIDI CC.  Any CC# can be used. \u003cspan\u003eB\u003c\/span\u003e\u003cspan\u003eutton follows the same MIDI channel as the fader.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeb Editor:\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/currentcofig_76ae6674-444e-4648-93f2-0799303d26de_1024x1024.png?v=1702002414\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003ch1\u003e\u003cstrong\u003e\u003cbr\u003e\u003cbr\u003eSwitch Operation:\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003eThe button can be configured in one of 4 different ways:\u003cbr\u003e\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003eMomentary\u003c\/strong\u003e.  Pressing the button will light red (only when held down) and                                               send only one MIDI msg when pressed\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e2 Position (2P)\u003c\/strong\u003e\u003cspan\u003e  Pressing the button will send one MIDI msg (toggling red) when                                        and one msg when pressed again turning off the LED.                                                          This is the default state and is good for mutes and other                                                       controls where there is a simple on\/off functionality.  Generally, MIDI                                  devices see 0 as \"off\" and 127 as \"on\" on the same  CC#.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e3 Position (3P)\u003c\/strong\u003e  Pressing the button will toggle it red and send one MIDI msg when                                    pressed, pressing again will send a second message and turn the LED                                green, and pressing on more time will turn off the LED and send the                                  \"off\" message.  The 3p and 4p modes are useful cycling 2 or 3 MIDI                                    messages\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e4 Position (4P)\u003c\/strong\u003e  Same as 3P but adds a 3rd \"on\" message \u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003e\u003cstrong\u003eEditing Parameters:\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eComing soon\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003e\u003cstrong\u003eFirmware Updating:\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFor firmware versions from 1.02 and up, simply click the bootloader button on the web editor, this will restart the device in bootloader mode and new drive (MSWBOOT) will appear on your computer, simply copy the new UF2 to that folder, it will close immediately and the device is updated.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFirmware versions prior to 1.02 require a physical bootload procedure to update the device. To update the firmware from 1.00, a small reset switch must be pressed twice in quick succession.  This button is accessed through a small hole in the corner and is offset a bit downwards so your tool needs to come in on a bit of an angle.  Pressing this twice will make a USB Drive appear on your computer (MSWBOOT) to which you copy the UF2 file to, as soon as you copy, the folder closes automatically and the operation is complete\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"344\" width=\"457\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/PXL_20240504_170754926.jpg?v=1714843339\" alt=\"\"\u003e\u003c\/p\u003e","brand":"Michigan Synthworks","offers":[{"title":"White","offer_id":40380808200278,"sku":"XVIM_WHT","price":255.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":40380808233046,"sku":"XVIM_BLK","price":255.0,"currency_code":"USD","in_stock":true},{"title":"NO LED Black","offer_id":42538087743574,"sku":null,"price":265.0,"currency_code":"USD","in_stock":false},{"title":"NO LED White","offer_id":42538090528854,"sku":null,"price":265.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/PXL_20231218_200434981.jpg?v=1702942443"},{"product_id":"xena","title":"Xena 6 Voice Polyphonic Digital OSC \/ Analog VCF Desktop Synthesizer","description":"\u003cp\u003eXena is a rework of the legendary Mutable Instruments Ambika DIY synthesizer.   Now fully machine assembled with an updated layout and an improved modern power supply.  Available with all original 3 voice cards and compatible with 3rd part operating systems as well as a new AS3109 (modern reissue of the original Roland filter chip) filter\u003c\/p\u003e\n\u003cp\u003eXena Features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e6 voices with individual outputs, one Mix output (Mono)\u003c\/li\u003e\n\u003cli\u003e2 digital oscillators per voice, with 36 oscillator algorithms\/wavetables.\u003c\/li\u003e\n\u003cli\u003e1 sub-oscillator, also configurable as a transient generator.\u003c\/li\u003e\n\u003cli\u003ePre-filter overdrive and bit-crushing effect.\u003c\/li\u003e\n\u003cli\u003eAnalog 4-pole filter (or 2-pole multimode filter depending on the type of voicecard used) and VCA.\u003c\/li\u003e\n\u003cli\u003e3 ADSR envelopes, 3 patch-level LFOs, 1 voice-level LFO.\u003c\/li\u003e\n\u003cli\u003eModulation matrix with 14 slots and 4 modulation modifiers.\u003c\/li\u003e\n\u003cli\u003e1 arpeggiator, 1 note sequencer and 2 step sequencers per part.\u003c\/li\u003e\n\u003cli\u003eFlexible mapping of the 6 voices. A single patch with 6 voice-polyphony, 6 independent mono parts, 2 layered patches with 3-voices polyphony, a 3-voice unison bass line on the lower half of the keyboard with a 3-voice unison lead on the upper half... all are possible!\u003c\/li\u003e\n\u003cli\u003eMicroSD storage allows the storing of a life-long of patches, programs and multis, along with the history of editing operations for undo\/redo.\u003c\/li\u003e\n\u003cli\u003eEasy to change voice cards\u003c\/li\u003e\n\u003cli\u003eCase size: \u003cspan\u003e10.5\"x6.5\"x1.75\"\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFilter Options:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe device is available with the original 3 Mutable voice cards (more will be added later one). Mixing voice cards is possible but not recommended.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSMR Filter:\u003c\/strong\u003e This filter uses the same topology as the Shruthi SMR4mkII. It is a low pass 4 pole OTA-C filter. Its a smooth \"Rolandish\" type filter\u003cbr\u003e\u003cstrong\u003e4P Filter:\u003c\/strong\u003e This filter uses the same core as the Shruhti 4-Pole Mission but only offers the LP4 output. I would characterize the 4P filter as a a bit fuzzier than the SMR type\u003cbr\u003e\u003cstrong\u003eSVF Filter:\u003c\/strong\u003e This filter board features a 2-pole state variable filter with low-pass, band-pass and high-pass modes. It is half of the Shruthi SVF Filter\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003e\u003ca href=\"https:\/\/pichenettes.github.io\/mutable-instruments-diy-archive\/ambika\/manual\/\"\u003eOriginal Ambika Manual\u003c\/a\u003e\u003c\/h1\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eXena 3109:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/g5TBMiOQZSk?si=cWYLTkgRin8cHaH-\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/madQMwr0lu4?si=L5Z6NcpcaKL8KFDS\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e SMR-4 Ambika Demo:\u003cbr\u003e\u003cbr\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/iN7MuTRc5Xs?si=U3XqYGnEa3gulvwn\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e4P vs SMR Demo:\u003cbr\u003e\u003cbr\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/NriiWrXqpFs?si=nSc4PrCeZIcvy2Op\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e SVF Demo:\u003cbr\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/iUcjvSMF1nQ?si=PHj7k8xb-FB9YQQ3\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eGeneral Amibika Usage Demo:\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/3_C6XPta1L8?si=0mqnUu_90L_gXz-2\" height=\"315\" width=\"560\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eIncludes:\u003c\/p\u003e\n\u003cp\u003eXena Desktop Synth\u003cbr\u003e12V DC universal (100-240V) Power Supply\u003cbr\u003ePreformatted SD card\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/100.png?v=1552430123\"\u003e\u003c\/p\u003e\n\u003cp\u003eDerivative \u003ca href=\"https:\/\/github.com\/MichiganSynthWorks\/Synths\/\"\u003ePCB \u0026amp; Schematic\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eprovided by Michigan Synth Works under creative commons\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/creativecommons.org\/licenses\/by-sa\/3.0\/\"\u003eCC-BY-SA-3.0\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003elicense.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/pichenettes\/ambika\"\u003eOriginal CAD file, PCB \u0026amp; Schematic and original design elements\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eprovided by Mutable Instruments under creative commons\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/creativecommons.org\/licenses\/by-sa\/3.0\/\"\u003eCC-BY-SA-3.0\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003elicense.\u003c\/p\u003e","brand":"Michigan Synth Works","offers":[{"title":"4P: 4-Pole VC Integrator Based \/ Standard White","offer_id":40391909605462,"sku":"Xena_wht","price":450.0,"currency_code":"USD","in_stock":false},{"title":"SMR: 4-Pole OTA Based \/ Standard White","offer_id":40391909638230,"sku":"Xena_wht-2","price":450.0,"currency_code":"USD","in_stock":false},{"title":"SVF: 2-pole multimode SVF \/ Standard White","offer_id":40391909670998,"sku":"Xena_wht-3","price":450.0,"currency_code":"USD","in_stock":false},{"title":"3109: Roland inspired 4 pole LPF \/ Standard White","offer_id":40835036184662,"sku":"","price":460.0,"currency_code":"USD","in_stock":false},{"title":"PVX: Polovoks LPF Filter \/ Standard White","offer_id":42141462298710,"sku":"","price":450.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/Xena1.png?v=1699651526"},{"product_id":"nutzwinger","title":"Nutzwinger: Euro Nut Installation Tool","description":"\u003ch2\u003e\u003cstrong\u003ePresenting the Future of Euro Split Nut Installation!\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003eNutzwinger is a steel socket specifically designed for the installation of the split nut, top adjust M6 nuts.  A nickel plated, heat treated carbon steel allows for use in any 4mm hex shank tool and includes a bushing to enable the pick up of nuts with one hand and protects the panel while installing.\u003c\/p\u003e\n\u003cp\u003eCompatible with \u003cstrong\u003eQingPu\u003c\/strong\u003e (aka Thonkicon), \u003cstrong\u003eKobiconn\u003c\/strong\u003e (slightly larger keyway), and \u003cstrong\u003eBefaco\u003c\/strong\u003e Nuts.  Unfortunately Befaco nuts are much larger in diameter so the bushing needs to be removed before use.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/TsyAG1jZGio?si=gjbXM69Z961vaFnZ\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Michigan Synth Works","offers":[{"title":"Default Title","offer_id":40404959625302,"sku":"nutzwinger","price":15.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/Nutzwinger3.png?v=1700150171"},{"product_id":"spydur-edp-spider-replica-diy-kit-link-and-cv-gate-sequencer-for-edp-wasp","title":"Spydur: EDP Spider Replica DIY Kit.  LINK and CV\/Gate Sequencer for EDP Wasp","description":"\u003cp\u003eSpydur is a 100% accurate replica of the Electronic Dream Plant Spider sequencer which was designed for the EDP Wasp. \u003c\/p\u003e\n\u003cp\u003eThis is only offered in kit form, all \"standard\" electrical parts are machine stuffed.  The only parts that require soldering are the jacks, rotary switch connections, and IC sockets for the vintage parts.  No wiring!\u003c\/p\u003e\n\u003cp\u003eSpydur features:\u003cbr\u003e\u003cbr\u003e256 Step notes or 84 real time notes\u003cbr\u003e4 Transpose controls\u003cbr\u003eCV\/Gate Output with selectable S or V trigger\u003cbr\u003eFull Size LINK connector for Wasp and MINI DIN8 for use with Jasper (DIY Wasp clone)\u003c\/p\u003e\n\u003cp\u003eSpider was designed for Wasp and although it WILL work with Gnat for recording and playing back sequences via LINK, the differences between Gnat and Wasp with their LINK implementations means that\u003cstrong\u003e the CV output will not work with Gnat.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Kit includes:\u003cbr\u003e\u003cbr\u003e1x Main circuit board (all SMD parts soldered)\u003cbr\u003e1x IO Board with all parts\u003cbr\u003e5x IC Sockets\u003cbr\u003e3x Trimmers\u003cbr\u003e3x Rotary Stitches with Caps\u003cbr\u003e8x Tact Switches with Caps\u003cbr\u003e3x Top and bottom Panels\u003cbr\u003e1x 9V battery terminal\u003cbr\u003e1x Standoff\/Screw kit\u003cbr\u003e1x IM6564 Programmed PROM\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThese parts are \u003cstrong\u003eincluded in the full kit only,\u003c\/strong\u003e these are tested vintage parts\u003cbr\u003e\u003cbr\u003e2x 6561 Memory chips\u003cbr\u003e1x 8035 CPU\u003cbr\u003e1x ZN729E 8Bit DAC\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTechnical Specs:\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eSize: 25cm x 15 cm x 6cm, 0.7 kg\u003cbr\u003e\u003cbr\u003ePower: DC 9V Tip Negative (adapter not included) or 6LR61 (aka standard 9V) Battery\u003c\/p\u003e\n\u003ch1\u003e\u003cstrong\u003eAssembly Instructions:\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eMain Board:\u003cbr\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003eSolder Tact switches, IC Sockets, and trimmers to the boards.  The trimmers are all the same value.  \u003cstrong\u003eTake care with IC socket orientation! The processor FACES UP all other ICs FACE DOWN.  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSolder processor jumper (8035 if that is supplied with your kit)\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/uC_jumper_6429fbcf-3a33-4e23-ba67-2fded7839bc8_600x600.png?v=1731777849\" alt=\"\" style=\"float: none;\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003eSolder 9V Battery leads to the + and - terminals \u003cstrong\u003efrom the back\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eRemove protective film from the DIP switch and set to V or S trig as noted on the board\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/trig_switch_1d155d50-6a23-4e2a-a5fd-c817922731df_600x600.png?v=1731777849\" alt=\"\" style=\"float: none;\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eRotary Switches:\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003eSet the key on all 3 switches to position \"2\" and mount to the board securing with the lock nut and washer on the top of the board\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/switchmod_600x600.png?v=1731778337\" alt=\"\" style=\"float: none;\"\u003e\u003c\/div\u003e\n\u003cp\u003eCut the supplied wire into 6, 6cm long pieces and connect:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eS2: Terminals A and 2\u003c\/li\u003e\n\u003cli\u003eS3: Terminals A and 2\u003c\/li\u003e\n\u003cli\u003eS4: Terminals A and 1\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/switchwire_38a418cc-cc95-4e25-8dd0-229519a8baa0_600x600.png?v=1731777849\" alt=\"\" style=\"float: none;\"\u003e\u003c\/div\u003e\n\u003cp\u003eCarefully inset ICs into sockets \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMainboard is done!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eIO Board\u003cbr\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003eSolder all jacks to the board making sure everything sits flush and even\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/ioboard_280903d6-ae12-47e2-8cfd-4a44deaf5007_600x600.png?v=1731777849\" alt=\"\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/div\u003e\n\u003cp\u003eInsert FPC cable into socket with the \u003cstrong\u003eblue tape facing up \u003c\/strong\u003eby lifting the lever, inserting the cable completely in until it stops, then closing the lever.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/fpc_open_f91007fb-fdcd-42e2-9b28-84aa188eff1c_600x600.png?v=1731777849\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/FPC_closed_d154f634-2551-467e-aa83-321afbf086a7_600x600.png?v=1731777850\"\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIO Board is done!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFinal Assembly\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eAttach 9x 18mm standoffs to the base board\u003cbr\u003eAttach 3x 32mm standoffs to the base board\u003cbr\u003e(Optional) Remove tape and attach 9V battery to the base where show\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/bottom_layout_600x600.png?v=1731777849\" alt=\"\" style=\"float: none;\"\u003e\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAttached mainboard to base with 7x 5mm standoffs around the tact switches and 12mm standoffs at the top\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/topassem_layout_600x600.png?v=1731777850\"\u003e\u003c\/div\u003e\n\u003cp\u003eAttach Tact switch cover with 5 M3 screws at the bottom and 2x 5mm standoffs at the top\u003c\/p\u003e\n\u003cp\u003eAttached IO board to the top panel with 2xM3 screws and 3xM2 screws at the big LINK jack\u003c\/p\u003e\n\u003cp\u003eCarefully connect the FPC cable to the mainboard connector blue tape up and slide the top panel over the rotary switches.  Attach with M3 screws.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/toppanelassm_600x600.png?v=1731777849\"\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"margin-bottom: 16px; float: none;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/Finalassm_600x600.png?v=1731777849\"\u003e\u003c\/div\u003e\n\u003cp\u003eAttach knobs and tighten set screws securely\u003c\/p\u003e\n\u003cp\u003eConnect DC battery Lead\u003c\/p\u003e\n\u003cp\u003eDone!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch1\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdditional Notes\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIf using Spydur with Gnat, it is NOT necessary to fit the DAC, it wont work correctly anyway\u003c\/li\u003e\n\u003cli\u003eThere cannot be anything else connected the link interface.  You will need to disconnect any MIDI adapters.  You can buss several (i've done 3) link devices together with but a MIDI interface will mess that up so it needs to be disabled.   I unplugged the connector on my JasperIN but technically, you could just power it down and put a switch (to be tested)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Michigan Synth Works","offers":[{"title":"Complete Kit (All parts included)","offer_id":41923528687702,"sku":"","price":250.0,"currency_code":"USD","in_stock":false},{"title":"Partial Kit (All parts included EXCEPT vintage parts)","offer_id":41923528720470,"sku":"Spydur_barebones","price":195.0,"currency_code":"USD","in_stock":false},{"title":"Fully Assembled Device","offer_id":42051445817430,"sku":"","price":325.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/Spydur.png?v=1737589500"},{"product_id":"npn-clowns-tb-303-dual-transistor-replacements","title":"NPN Clowns.  TB-303 dual transistor replacements","description":"\u003cp\u003eThese parts are worthy replacements for the 2SC1583 and 2SC2291 MELCO dual transistors used in the filter of the Roland TB-303.  This is for a set of 4 parts, 3 1583 (Green) and one 2291 (purple).  Header pins come installed and soldered.\u003c\/p\u003e","brand":"Michigan Synth Works","offers":[{"title":"Default Title","offer_id":42225024630870,"sku":"","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/DualNPN.png?v=1743687538"},{"product_id":"din-socket-tr-606-mc-202-replaces-roland-pn-13429607","title":"DIN Socket, TR-606\/MC-202 Replaces Roland PN 13429607","description":"\u003cp\u003eThis is an UNSWITCHED socket for TR-606, MC-202, others.  Fits TR-606 case with no modification.  Will also work for RE-303\/606\u003c\/p\u003e","brand":"Michigan Synth Works","offers":[{"title":"Default Title","offer_id":42272206127190,"sku":"","price":8.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/PXL_20250427_134408873_d9a10219-d65b-4560-a24d-9d29d8fa8a4b.jpg?v=1745763226"},{"product_id":"din-socket-switched-tb-303-mc-20-replaces-roland-pn-13429706","title":"DIN Socket, Switched, TB-303\/MC-202 Replaces Roland PN 13429706","description":"\u003cp\u003eThis is the SWITCHED socket for TB-303, MC-202, others.  Fits stock TB-303 case with no modification.  \u003c\/p\u003e\n\u003cp\u003ePlease note:  Since RE-303 has different placement of resistors around the DIN socket, it is recommended to mount R182 on the bottom of the PCB\u003c\/p\u003e\n\u003cp\u003e Replaces Roland PN 13429706\u003c\/p\u003e","brand":"Michigan Synth Works","offers":[{"title":"Default Title","offer_id":42286949072982,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/SWDIN1.png?v=1746472284"},{"product_id":"yamaha-cs-01-midi-retrofit","title":"Yamaha CS-01 MIDI Retrofit","description":"\u003cp\u003eThis a a modified UMR2 MIDI retrofit board specifically designed for use inside a Yamaha CS01 (I or II) without removing the speaker and requires a hole to be drilled for the TRS MIDI jack.  The device has be simplified by removing connections not required for the CS01 so it CANNOT be used with other devices.  It also features psiMIDI which means it can accept either 3.5 TRS A or TRS B MIDI cable\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis is an DIY kit which includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCS01 UMR2 PCB: Complete and preprogrammed with UMR2 firmware \u003c\/li\u003e\n\u003cli\u003eRibbon cable, wires, TRS MIDI Jack\u003c\/li\u003e\n\u003cli\u003e2m long TRS MIDI A Cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/AKVCh7_-Oso?si=5mbS_muEw1DG9Ky3\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstall Instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 1: Ribbon cable Prep\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eStrand out one end to 1.2 cm from where the cable is stripped\u003c\/li\u003e\n\u003cli\u003eRemove the insulation by gently pulling off the ends and tin the wires\u003c\/li\u003e\n\u003cli\u003eOn the other side, simply remove the ends and tin, no stranding needed\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/PXL_20250807_211829704.jpg?v=1754610604\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/PXL_20250807_211943748.jpg?v=1754610605\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/PXL_20250807_215548043.jpg?v=1754610605\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 2: MIDI Board Prep\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eTin all pads with a small blob of solder on both adapter and CPU board\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eStep 3: CS01 board prep (CS01 II is the same)\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eTrim the leads on the by the keyboard pads where shown\u003c\/li\u003e\n\u003cli\u003eAdd fresh solder to the 12 pads, try to make them even in size\u003c\/li\u003e\n\u003cli\u003eSolder the DC+ and DC- wires where shown\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/Boardprep.png?v=1754611056\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 4: MIDI Board soldering\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSolder the ribbon cable starting with the middle 2 pins and work your way out.  The red strip is pin D0\u003c\/li\u003e\n\u003cli\u003eOn the solder adapter board solder the other end of the ribbon (not that D0 is not marked)\u003c\/li\u003e\n\u003cli\u003eRemove the ground tab from the TRS jack and solder on the wires\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/PXL_20250807_215850825.jpg?v=1754610605\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/PXL_20250807_212107550.jpg?v=1754610604\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/PXL_20250807_221528742.jpg?v=1754610604\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/PXL_20250807_221539466.jpg?v=1754610604\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/PXL_20250807_221649617.jpg?v=1754610604\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 5: CS01 Drilling\/MIDI Jack.\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eDrill an 8mm (5\/16\") hole where shown.  A step drill is recommended.  \u003cspan style=\"text-decoration: underline;\"\u003eTHIS IS A DELICATE STEP SO EXTREME CARE SHOULD BE TAKEN\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eInstall the MIDI Jack followed by the nut from the other side.  Tighten with needle nose pliers.  Apply sticker (cut in half first)\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/HoleLocation.png?v=1754610565\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/PXL_20250807_230327044.jpg?v=1754610604\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/midisticker.png?v=1754612201\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 6: Install the MIDI board\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePlace the adapter board on top of the keyboard pins \u003c\/li\u003e\n\u003cli\u003eSolder the outermost pins to the pads below them and solder the rest.  Test with meter if needed, those points correspond to the red and black wired below\u003c\/li\u003e\n\u003cli\u003eRemove the backing from the tape on the back of the adapter\u003c\/li\u003e\n\u003cli\u003eRoute the MIDI wires in the gap between the keyboard and main board\u003c\/li\u003e\n\u003cli\u003eStick the MIDI board where shown running the wires under the board with a 90 bend in the ribbon\u003c\/li\u003e\n\u003cli\u003eSolder the MIDI wires to the marked terminals THE ORIENTATION DOES NOT MATTER\u003c\/li\u003e\n\u003cli\u003eSolder the DC+ and DC- wires\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/adapter_solder.png?v=1754611934\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/PXL_20250807_224604314.jpg?v=1754610604\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStep 7: Calibration\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eConnect TRS MIDI to your keyboard, set the footing on the CS to 32 (IMPORTANT)\u003c\/li\u003e\n\u003cli\u003eTurn the power switch on.  While holding the program button down with something pointy but not sharp, plug the DC jack in.  Release the pointy thing\u003c\/li\u003e\n\u003cli\u003eLED will flash.  Press the F key on your MIDI keyboard on the octave you want the MIDI notes to trigger the CS-01 to start,  THE MIDI WILL \u003cspan style=\"text-decoration: underline;\"\u003eONLY\u003c\/span\u003e TRIGGER 32 NOTES FROM THAT F NOTE.  Once the MIDI note is received, the device will pause to save and the LED will flash again\u003c\/li\u003e\n\u003cli\u003eStarting with the first key on the CS-01, you must play each not sequentially, after the note is received, the LED will turn red when the note is on, then green flashing again for the next note.  Repeat for all notes\u003c\/li\u003e\n\u003cli\u003eWhen complete, press program again, LED will go red then go out\u003c\/li\u003e\n\u003cli\u003eUnplug device, and power up again\u003c\/li\u003e\n\u003cli\u003eCheck all MIDI note work over the 32 key range, if any notes are missing, repeat the process\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOriginal Design by \u003cspan\u003eJohn Staskevich, 2017\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/staskevich\/UMR2\"\u003eGitHub - staskevich\/UMR2: Universal MIDI retrofit PCB for matrixed-switch keyboards.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/MichiganSynthWorks\/Synths\/tree\/main\/UMR2CS01\"\u003eSynths\/UMR2CS01 at main · MichiganSynthWorks\/Synths\u003c\/a\u003e\u003c\/p\u003e\n\u003cpre\u003eThis derivative work is licensed under a Creative Commons Attribution 4.0 International License. \u003ca rel=\"nofollow\" href=\"http:\/\/creativecommons.org\/licenses\/by\/4.0\/\"\u003ehttp:\/\/creativecommons.org\/licenses\/by\/4.0\/\u003c\/a\u003e\u003c\/pre\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Michigan Synth Works","offers":[{"title":"Default Title","offer_id":42537315401814,"sku":"CS01MIDI","price":60.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/PXL_20250731_130543805.jpg?v=1753969482"},{"product_id":"caveman-modules-mul-2hp-two-channel-passive-multiple","title":"Caveman Modules Mul.  2HP Two Channel Passive Multiple","description":"\u003cp\u003eMul is a simple passive multiple that has a 1 to 6 zone or two, 2 to 3 zones.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 2HP\u003c\/li\u003e\n\u003cli\u003eDepth: 15mm\u003c\/li\u003e\n\u003cli\u003eCurrent Draw: None (passive)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Michigan Synth Works","offers":[{"title":"Default Title","offer_id":42545610129494,"sku":null,"price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/MUL.png?v=1754231263"},{"product_id":"caveman-modules-3osc-tb-inspired-vco","title":"Caveman Modules 3OSC: TB inspired VCO","description":"\u003cp style=\"line-height: normal;\" class=\"MsoNormal\"\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003e30SC is voltage-controlled oscillator inspired by the legendary Roland TB-303 with square, tri, and saw outputs. 3OSC also features an innovative hard sync and an FM modulation attenuverter.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"line-height: normal;\" class=\"MsoNormal\"\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003eSpecifications\u003cbr\u003e• Width: 6HP\u003cbr\u003e• Depth: 25 mm\u003cbr\u003e• Current Draw: +12 V: 6mA, -12 V: 6mA\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Michigan Synth Works","offers":[{"title":"Default Title","offer_id":42545634410582,"sku":"3osc","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/3OSC.png?v=1762367352"},{"product_id":"caveman-modules-adsr","title":"Caveman Modules CENV","description":"\u003cp\u003e\u003cspan style=\"font-size: 12.0pt; line-height: 115%; font-family: 'Aptos',sans-serif; mso-ascii-theme-font: minor-latin; mso-fareast-font-family: Aptos; mso-fareast-theme-font: minor-latin; mso-hansi-theme-font: minor-latin; mso-bidi-font-family: 'Times New Roman'; mso-bidi-theme-font: minor-bidi; color: black; mso-themecolor: text1; mso-ansi-language: EN-US; mso-fareast-language: EN-US; mso-bidi-language: AR-SA;\"\u003eAn AS3310 based envelope generator\/ADSR with per stage CV control, LED indicator, and Manual trigger\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003eSpecifications\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003e• Width: 6HP\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003e• Depth: 25 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003e• Output: 0-10V\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003e• Power Supply: Eurorack Power\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003e• Current Draw: +12 V: 21mA, -12 V :23mA\u003c\/span\u003e\u003c\/p\u003e","brand":"Michigan Synth Works","offers":[{"title":"Default Title","offer_id":42545636343894,"sku":"cavemanADSR","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/CENV.png?v=1762368857"},{"product_id":"caveman-modules-2vca","title":"Caveman Modules 2VCA","description":"\u003cp style=\"margin-bottom: 0in; line-height: normal;\" class=\"MsoNormal\"\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003eAn OTA based 2 channel voltage-controlled amplifier with linear or logarithmic responses and LED indicator\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin-bottom: 0in; line-height: normal;\" class=\"MsoNormal\"\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin-bottom: 0in; line-height: normal;\" class=\"MsoNormal\"\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003eSpecifications\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin-bottom: 0in; line-height: normal;\" class=\"MsoNormal\"\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003e• Width: 6HP\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin-bottom: 0in; line-height: normal;\" class=\"MsoNormal\"\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003e• Depth: 25 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin-bottom: 0in; line-height: normal;\" class=\"MsoNormal\"\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003e• Current Draw: +12 V: 21mA, -12 V: 20mA\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin-bottom: 0in; line-height: normal;\" class=\"MsoNormal\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"line-height: normal;\"\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Michigan Synth Works","offers":[{"title":"Default Title","offer_id":42545637818454,"sku":"caveman2VCA","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/2VCA_85dca6b6-f6d0-4fa2-8f65-c4a6c5abb025.png?v=1762366427"},{"product_id":"caveman-modules-poliroks","title":"Caveman Modules Poliroks VCF","description":"\u003cp class=\"MsoNoSpacing\"\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003eLow Pass and Band Pass filter based on the classic Soviet design with built in \u003c\/span\u003eVCA, CV inputs for Resonance and cutoff, CV amount pot.\u003c\/p\u003e\n\u003cp class=\"MsoNoSpacing\"\u003e\u003cspan style=\"mso-spacerun: yes;\"\u003e \u003c\/span\u003eA unique sounding and quirky VCF\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003eSpecifications\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003e• Width: 6HP\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003e• Depth: 25 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003e• Current Draw: +12 V: 10mA, -12 V: 10 mA\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"line-height: normal;\"\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Michigan Synth Works","offers":[{"title":"Default Title","offer_id":42545638867030,"sku":"poliroks","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/Poliroks_1c3c01b2-852e-4cde-be8e-2aed91cc0c65.png?v=1762366857"},{"product_id":"caveman-modules-cave","title":"Caveman Modules \"The Cave\" 84HP Euro Case","description":"\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003eLightweight 84HP Powered Eurorack case.\u003cspan style=\"mso-spacerun: yes;\"\u003e  \u003c\/span\u003eSteel case, pretty wood sides, M3 threaded strips.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003e• Detachable desktop legs in variety of tilt angles\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003e• Quick Access Rack Ears. Easy, tool-less in and out.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003e• Stackable and power chainable\u003cbr\u003e• Power capacity can be easily expanded with chainable powered bus boards\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003e• 49mm Deep\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003e• Standard Config has 1x Stone of Power module (8 Ports, no 5V)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003e• XL Config has 2x Stone of Power modules (16 Ports, 1A 5V)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003eIncludes:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003e1x 84HP Case\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003e1x Universal DC Supply\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003e2x Tilt legs\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003eSpecifications\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003e• Power Supply: 100-240V AC Adapter, DC 12 V, 3A Output\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003e• Current Capacity: \u003cbr\u003e   Standard: +12 V: 2 A, -12 V: 300 mA with one Stone of Power module\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003e   XL: +5 V: 1 A, +12 V: 2 A, -12 V: 300 mA with two Stone of Power modules\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e \u003c\/p\u003e","brand":"Michigan Synth Works","offers":[{"title":"Standard (8 ports)","offer_id":43583854116950,"sku":"thecave-1","price":175.0,"currency_code":"USD","in_stock":true},{"title":"XL (16 Ports + 5V)","offer_id":43583854149718,"sku":"thecave-2","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/PXL_20251017_205440398.jpg?v=1760735625"},{"product_id":"caveman-modules-totem-multimode-vcf","title":"Caveman Modules Totem Pole Mixing Multimode VCF","description":"\u003cp class=\"MsoNoSpacing\"\u003e\u003cspan style=\"color: #000000;\"\u003eTotem is a multimode voltage controlled filter with 16 different filter modes based on the 3109 OTA chip used in classic synths like the Roland SH-101, MC-202, Jupiter-8 and others.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNoSpacing\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"MsoNoSpacing\"\u003eMassive drive control for endless tone variety\u003c\/li\u003e\n\u003cli class=\"MsoNoSpacing\"\u003eCV control via attenuator\u003c\/li\u003e\n\u003cli class=\"MsoNoSpacing\"\u003eCV control via attenuverter \u003c\/li\u003e\n\u003cli class=\"MsoNoSpacing\"\u003eV\/OCT control with half and negative half scaling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFilter Modes:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ctable xmlns=\"http:\/\/www.w3.org\/1999\/xhtml\" cellspacing=\"0\" cellpadding=\"0\" dir=\"ltr\" border=\"1\" data-sheets-root=\"1\" data-sheets-baot=\"1\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"100\"\u003e \u003ccol width=\"149\"\u003e \u003ccol width=\"154\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMode\u003c\/td\u003e\n\u003ctd\u003eA\u003c\/td\u003e\n\u003ctd\u003eB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e24dB LPF\u003c\/td\u003e\n\u003ctd\u003e18dB LPF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003e12dB LPF\u003c\/td\u003e\n\u003ctd\u003e6dB LPF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003e12dB HPF + 6dB LPF A\u003c\/td\u003e\n\u003ctd\u003e12dB HPF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003e18dB HPF + 6dB LPF\u003c\/td\u003e\n\u003ctd\u003e18dB HPF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003ctd\u003e24dB BPF\u003c\/td\u003e\n\u003ctd\u003e12dB HPF + 6dB LPF B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003e12dB BPF\u003c\/td\u003e\n\u003ctd\u003e6dB HPF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003ctd\u003e12dB Notch + 6dB LPF\u003c\/td\u003e\n\u003ctd\u003e12dB Notch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003ctd\u003e18dB Allpass (phase) + 6dB LPF\u003c\/td\u003e\n\u003ctd\u003e18dB Allpass (phase)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003eSpecifications\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003e• Width: 12HP\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003e• Depth: 25 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003e• Current Draw: +12 V: 20mA, -12 V: 10 mA\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"line-height: normal;\"\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Michigan Synth Works","offers":[{"title":"Default Title","offer_id":42545657282646,"sku":"totem","price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/totem.png?v=1754234264"},{"product_id":"caveman-modules-cmix-4-channel-mixer","title":"Caveman Modules Cmix 4 Channel Mixer","description":"\u003cp class=\"MsoNoSpacing\"\u003e\u003cspan style=\"color: #000000;\"\u003eCmix is a simple 4 channel mixer with 2 buses.  Each channel can be routed to bus A, B. or AB\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNoSpacing\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"MsoNoSpacing\"\u003eLevel and overload LEDs per channel\/output\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cstrong\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003eSpecifications\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003e• Width: 6HP\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003e• Depth: 25 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003e• Current Draw (max): +12 V: 100mA, -12 V: 100 mA\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"line-height: normal;\"\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Michigan Synth Works","offers":[{"title":"Default Title","offer_id":42545719312470,"sku":"cmix","price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/CMIXFinal.png?v=1762365059"},{"product_id":"cv2bc-cv-interface-for-yamaha-breath-controller-inputs","title":"CV2BC, CV interface for Yamaha breath controller inputs","description":"\u003cp\u003eThis devices allows you to connected an external CV source to a breath controller input on any Yamaha device that supports BC-1, 2, or 3 breath controllers (CS-01, DX7, SY-99, Motif ETC).  Controls for Offset, Scale, and Gain.  Device can be plugged in directly or with included jumper.\u003c\/p\u003e","brand":"Michigan Synth Works","offers":[{"title":"Default Title","offer_id":42578191515734,"sku":null,"price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/PXL_20250815_135342806.jpg?v=1755266622"},{"product_id":"gnot-synthesizer","title":"Gnot Synthesizer","description":"\u003cp\u003ePLEASE NOTE:  This is a custom order device, 2-3 week lead time for assembled units.\u003c\/p\u003e\n\u003cp\u003eGnot is a 1:1 recreation of the EDP Gnat Synthesizer.  It features digital oscillator, Low pass filter, LFO, and AD Envelope Generator.  It can be controlled via 25 key touch keyboard or EDP LINK 7 pin DIN.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDCO  \u003c\/strong\u003eOscillator has 3 shapes: Square, Saw, and \"Enhanced\" as well as a noise source.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLFO \u003c\/strong\u003e 5 Shapes: Sine, Saw, Rev Saw, Square and Random\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVCF \u003c\/strong\u003e Resonant Low Pass with LFO or ENV modulation\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnvelop Generator\u003c\/strong\u003e  Attack\/Decay with Filter contour control\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKEYBOARD\u003c\/strong\u003e  25 Key Touch with Glide\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eI\/O\u003c\/strong\u003e  1\/4\" Mono Phone output, 9VDC (Tip Neg, 200 mA min, 2.1\/5.5mm Barrel), DIN7 LINK\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpeaker included \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCurrently the device is DC only\u003c\/p\u003e\n\u003cp\u003eI do not offer a MIDI to LINK device at this time but will in the future.\u003c\/p\u003e\n\u003cp\u003e1.4 Kg, 400x230x90mm\u003c\/p\u003e\n\u003cp\u003eI am offering the device as built OR as a barebones version for people who would like to supply their own case.  The case is use is manufactured by JLC3DP and can be purchased painted in several colors.  These cases are expensive to import into the US so I will provide the files and instructions on how to order them for people who are not in the US and prefer to order themselves.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/misw.us\/GnotCase.zip\" rel=\"noopener\" target=\"_blank\"\u003eCase files are here\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eI recommend \u003ca href=\"https:\/\/jlc3dp.com\/3d-printing-quote\"\u003eJLC3DP\u003c\/a\u003e to make the case.  Specs are below, you can use other processes or materials if you like however these are the specs i use for my cases and can only vouche for those.  \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/Printspecs.png?v=1759848268\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Michigan Synth Works","offers":[{"title":"Fully Assembled","offer_id":43436956385366,"sku":"Gnot_ASM","price":399.0,"currency_code":"USD","in_stock":true},{"title":"Bare Bones kit","offer_id":43436956418134,"sku":"Gnot_SMDKIT","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/gnot2025_fadffe51-3bce-470e-b172-7566c690d5d8.png?v=1759758512"},{"product_id":"caveman-modules-starter-system","title":"Caveman Modules Starter System","description":"\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"color: #000000;\"\u003eThis is a starter system in the 84HP Cave case and the following Modules:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"color: #000000;\"\u003e1x Cavekeys with one octave\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"color: #000000;\"\u003e2x 3OSC Oscillators\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"color: #000000;\"\u003e1x MUL Passive Multiple\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"color: #000000;\"\u003e1x CMIX 4 Channel Mixer\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"color: #000000;\"\u003e1x Poliroks Voltage Controlled Filter with Low Pass and Notch\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"color: #000000;\"\u003e1x Totem Voltage Controlled Filter with 16 Filter Modes\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"color: #000000;\"\u003e1x CENV ADSR Envelope Generator\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"color: #000000;\"\u003e1x 2VCA 2 Channel Voltage Controller Amplifier\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"color: #000000;\"\u003e2x Magnetic Tilt Legs\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"color: #000000;\"\u003e1x DC Supply\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"color: #000000;\"\u003ePATCH CABLES NOT INCLUDED\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e \u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003eSpecifications\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003e• Power Supply: 100-240V AC Adapter, DC 12 V, 3A Output\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003e• Current Capacity: \u003cbr\u003e   Standard: +12 V: 2 A, -12 V: 300 mA with one Stone of Power module\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"margin-bottom: 0in; line-height: normal;\"\u003e\u003cspan style=\"color: black; mso-themecolor: text1;\"\u003e  \u003c\/span\u003e\u003c\/p\u003e","brand":"Michigan Synth Works","offers":[{"title":"Default Title","offer_id":43583905038422,"sku":null,"price":899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/cavemanstarter.jpg?v=1762363885"},{"product_id":"msw-820-analogue-synthesizer","title":"MSW-820 Analogue Synthesizer","description":"\u003ch1 dir=\"ltr\"\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDiscord Channel is up! \u003ca href=\"https:\/\/discord.gg\/q5wEj5hBf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eClick Here\u003c\/a\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e\u003ca href=\"https:\/\/misw.us\/MSW-820UserGuide.pdf\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e\u003cstrong\u003eUSER MANUAL\u003c\/strong\u003e\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003eMSW-820 is a 2 oscillator based analogue monosynth with an advanced 16 mode voltage controlled filter, 2 envelope generators, digital LFO with sync and trigger functions, digital noise source with 8 flavors, MIDI (TRS or USB), all in a compact desktop or euro format.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSpecifications:\u003c\/span\u003e\u003c\/h2\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eVCOs\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eAS3340 Based, Pulse and Sawtooth Waveforms\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eENV Modulation (OSC1, -5 to 5) and LFO Modulation (OSC2, 0-10)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eRange: 16'\/8'\/4', 7 Octaves\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ePulse Width Modulation: 50% to Min\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ePWM Mode: ENV\/Manual\/LFO Modulation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eMaster and OSC2 (offset) Tune Control\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ePulse\/Sawtooth Mixer control per Oscillator\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e2 Hard Sync Modes: O2 Track Pitch or O2 Do not track pitch\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e2 Reset Modes: Reset O1 on gate or Reset O1 and O2 on gate\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eSound Mixer \u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\n\u003cspan\u003eExternal Input (pre filter)\u003c\/span\u003e\u003cspan\u003eOSC 1 Level\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eOSC 2 Level \u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eSub Osc Level tracking OSC1 with 1, 2, and 2 PWM Octave Settings\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\n\u003cspan\u003eNoise Level with 8 Noise Models:\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eWhite, Pink, Hex Invert, Crackle, Orgone (pitched), Sonar (pitched)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eVCF\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\n\u003cspan\u003eAS3109 Base\u003c\/span\u003e\u003cspan\u003e16 Modes.  Low Pass, High Pass, Band Pass, Allpass (aka Phase)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eCutoff Frequency: 10Hz to 20kHz\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eResonance: 0- Self Oscillation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eCV Follow: 0-100%\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e\"This\" knob (Audio rate filter modulation from OSC1's triangle output)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eEnvelope Modulation via Attenuverter (-5 to 5)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eLFO Modulation via Attenuverter (-5 to 5)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ePitch Modulation via Attenuverter (-5 to 5)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eExternal CV Modulation via Attenuverter (-5 to 5)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eLFO\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\n\u003cspan\u003eRate: 0.1 Hz to 22 Hz. \u003c\/span\u003e\u003cspan\u003e8 Shapes with crossfade between shapes:\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003eSine, Square, Ramp, Tri, Saw, Expo Decay, Random, Smoothed Random\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e2 Reset Modes.  Reset on Gate and Reset on Gate with Phase Control (via Fade knob)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eFade Control: LFO Delay (Reset off, Reset Mode II) or LFO Phase (Reset Mode II)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eBipolar Rate indicator \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eEnvelopes \u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eAttack time: 1.5 ms to 2 s\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eDecay time: 2 ms to 10 s\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eSustain Level: 0-100%\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eRelease Time: 2 ms to 10 s\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eModulation Envelope is hardwired to Modulation bus\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eVCA Envelope is hardwired to VCA\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePortamento\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eMain Pitch (Master Tune) slide\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAccent\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eTwo Modes: Accent on VCF, Accent on VCF and VCA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eAccent level controlled via EXT mod slider\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eVCA\/Output Mixer\/VCA 2 \u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eSynth VCA Control\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eExternal Input (Thru, VCA2 via MOD Env, VCA 2 via EXT CV)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eInputs\/Outputs \u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eMIDI IN. TRS 3.5mm PSIMIDI (either A or B)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eClock IN to Control LFO Rate**\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eGate IN. 5-10V*\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eV\/Oct IN*\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eExt CV (VCF Modulation OR Accent Gate)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCV2 (VCA2 CV Input)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAudio IN\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSynth\/Mix OUT\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eUSB C IN\/OUT.  5V Power 200 mA.  DC Adapter included.  Also serves as USB MIDI \u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e*\u003c\/span\u003e\u003cspan\u003eAnalog inputs override MIDI\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e**\u003c\/span\u003e\u003cspan\u003eOverrides MIDI clock, switches LFO to clocked mode\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/h3\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eMIDI Control\/ MIDI Features\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e      \u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e          \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eLFO Shape\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e CC#\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e14\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eLFO Rate (divisor when clocked)\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e CC#\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e20\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eLFO Reset to phase\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e CC#\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e22\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eLFO sample and hold\/release (switch @ 64)\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e CC#\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e23\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePitch bend up range* CC#\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e3\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePitch bend down range (use up range if zero)*\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e CC#\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e86\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eFilter freq (via ExtCv slider)\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e CC#\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e74\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eNoise select*\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e CC#\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e30\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eNoise click mode  (switch @ 64)\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e CC#\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e89\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePorta time*\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e CC#\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e5\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePorta on\/off\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e (switch @ 64)**\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e CC#\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e65\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003ePorta “glide mode” (switch @ 64)\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e CC#\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e85\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eMod wheel\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e CC#\u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e1\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eMod depth(LFO to Pitch amount in semitones)*\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e??\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eVelocity to filter mod amount*\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e\u003cspan class=\"Apple-tab-span\"\u003e \u003c\/span\u003e\u003c\/span\u003e\u003cspan\u003e??\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e*\u003c\/span\u003e\u003cspan\u003eSetting is saved\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e**saved, but only activated when MIDI is detected\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eIncluded\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eUniversal wall adapter, USB A to USB C cable (power and Data), 1.5m TRS MIDI Cable (type A)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003ePower\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e5V DC, 200 mA USB C (Adapter Included)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEuro Power: +12V 100 mA, -12V 80 mA\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eDimensions\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003e220x120x50 900g\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEuro: 46HP\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Michigan Synth Works","offers":[{"title":"Desktop","offer_id":43907965714518,"sku":"MSW820D","price":499.0,"currency_code":"USD","in_stock":true},{"title":"Euro","offer_id":43907965747286,"sku":"MSW820E","price":450.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/PXL_20251215_102827030_48cb757b-63e3-48e7-bcd9-5f065981e55c.jpg?v=1766244222"},{"product_id":"lrb-303-diy-303-kit","title":"LRB-303 DIY 303 Kit","description":"\u003cp\u003e\u003cstrong\u003ePLEASE READ\u003cbr\u003e\u003cbr\u003eThere are a limited number of kits in stock.  A second large batch has been ordered and will be ready to ship in 2-3 weeks so I am making those available to order now.  Orders will fulfilled in the order received. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/forms.gle\/FUvFVxC1nf2VyjsE6\"\u003e\u003cstrong\u003eIf you are interested in an assembled device click here\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThis a complete kit to build the LRB-303 synthesizer.    This is NOT a beginner kit and some kit building skills are necessary.  Boards are 4 layer FR4 ENIG plated and fully ROHS Compliant.\u003c\/p\u003e\n\u003cp\u003eTools Required:\u003c\/p\u003e\n\u003cp\u003eSoldering Iron \u003cbr\u003eSolder (ROHS SAC305 solder is used on the board)\u003cbr\u003e\u003ca href=\"https:\/\/www.mouser.com\/ProductDetail\/Bourns\/H-90?qs=sGAEpiMZZMukHu%252BjC5l7YZAGmLqP04Zc4%252BF8z0srRPA%3D\"\u003eTrimmer Adjustment Tool\u003c\/a\u003e or Small Blade flat screw driver\u003cbr\u003eWire Strippers\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/michigansynthworks.com\/pages\/lrb-303-build-guide\"\u003e\u003cstrong\u003eBUILD GUIDE HERE (work in progress)\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUser Manual: https:\/\/github.com\/djphazer\/OS-303\/wiki\/User-Guide\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/discord.com\/channels\/1472239884574920900\/1481309241527504966\"\u003e\u003cstrong\u003eBuild Support can be found on the Discord Channel\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSMD populated LRB-303 Mainboard\u003c\/li\u003e\n\u003cli\u003eSMD populated LRB-303 Switchboard\u003c\/li\u003e\n\u003cli\u003eAlps Tact switches, LEDS, Standoffs\u003c\/li\u003e\n\u003cli\u003eSwitched DIN Socket\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMainboard Through hole parts (8 Pots, 2 Brackets, Slide Switch, Audio, DC, CV Jacks)\u003c\/li\u003e\n\u003cli\u003ePrecut and Tinned Ribbon Cables (4 Pcs)\u003c\/li\u003e\n\u003cli\u003eAlps Rotary Switches\u003c\/li\u003e\n\u003cli\u003ePrecut interconnect wires\u003c\/li\u003e\n\u003cli\u003eOS-303 Processor with MIDI harness\u003c\/li\u003e\n\u003cli\u003eDust Covers (4 pcs)\u003c\/li\u003e\n\u003cli\u003eRub-on Case Art Sheet\u003c\/li\u003e\n\u003cli\u003eMetal Keyboard panel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNOT Included:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKnobs\/ Button Caps.  Available from Krumptronics or Sound to Parts\u003c\/li\u003e\n\u003cli\u003eCase \u003ca href=\"https:\/\/jlc3dp.com\/3d-models\/detail\/MX13464-LRB-303-Synthesizer-Enclosure?spm=Jlc3dp.3dmodels\"\u003e\u003cstrong\u003eAVAILABLE HERE\u003c\/strong\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCase Ordering Instructions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAny Material Can be used for the case however I recommend 9600 Resin with Spray Painted Surface finish.  That is proven good.  JLC will probably complain about wall thicknesses, tell them that you accept it as is.   Clear is cool however the material does not have great dimensional stability so warping with clear is possible, YMMV.  Make sure you select \"Plastic Enclosure\" as the application\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/jlc3dp_example.jpg?v=1773967310\"\u003e\u003c\/p\u003e","brand":"Michigan Synth Works","offers":[{"title":"Black","offer_id":44211748798550,"sku":"LRB303","price":499.0,"currency_code":"USD","in_stock":false},{"title":"White","offer_id":44211748831318,"sku":"LRB304","price":499.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/PXL_20260320_001641629_e6151fc2-2562-45be-bd9f-172372a90d64.jpg?v=1774010400"},{"product_id":"os-303","title":"OS-303 Open Source x0x Processor","description":"\u003cp\u003eOpen Source TB-303 Processor.\u003c\/p\u003e\n\u003cp\u003eIncludes:  OS-303 Processor Flashed with most current firmware and MIDI Jack\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/djphazer\/OS-303\"\u003edjphazer\/OS-303: Open Source TB-303 CPU firmware\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eUser Guide: https:\/\/github.com\/djphazer\/OS-303\/wiki\/User-Guide\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003e\u003ca rel=\"noopener\" href=\"https:\/\/discord.gg\/zGJEkx7E\" target=\"_blank\"\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/discord.gg\/7j2Vw7jx2f\" rel=\"noopener\" target=\"_blank\"\u003eJoin the Discord Channel!\u003c\/a\u003e\u003ca rel=\"noopener\" href=\"https:\/\/discord.com\/channels\/1472239884574920900\/1473032410940702873\" target=\"_blank\"\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThis is drop in replacement for the u650 processor used in TB-303, TR-606, and TR-808.  Currently only the TB-303 code is available.  More info soon!\u003c\/p\u003e\n\u003cp\u003eNow available with \u003ca href=\"https:\/\/superos303.com\"\u003eSuperos303\u003c\/a\u003e, a greatly expanded TB-303 firmware which includes online editor, librarian and many new features\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/RfM76T2UIS8?si=y-e4OmEi9qmAnZGo\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/ufVeTXkXVlY?si=QyKiQN40OT9LJDoa\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cpre\u003eMIT License\n\nCopyright (c) 2026 Nicholas J. Michalek\n\nPermission is hereby granted, free of charge, to any person obtaining a copy\nof this software and associated documentation files (the \"Software\"), to deal\nin the Software without restriction, including without limitation the rights\nto use, copy, modify, merge, publish, distribute, sublicense, and\/or sell\ncopies of the Software, and to permit persons to whom the Software is\nfurnished to do so, subject to the following conditions:\n\nThe above copyright notice and this permission notice shall be included in all\ncopies or substantial portions of the Software.\n\nTHE SOFTWARE IS PROVIDED \"AS IS\", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR\nIMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,\nFITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE\nAUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER\nLIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,\nOUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE\nSOFTWARE.\u003c\/pre\u003e","brand":"Michigan Synth Works","offers":[{"title":"Default Title","offer_id":44057638862934,"sku":"OS303CPU","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/PXL_20260521_130528513.jpg?v=1779369217"},{"product_id":"roland-mks-70-clean","title":"Roland MKS-70 Clean!","description":"\u003cp\u003e9\/10 condition with cartridge, US Version\u003c\/p\u003e","brand":"Michigan Synth Works","offers":[{"title":"Default Title","offer_id":45508515168342,"sku":null,"price":1800.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/PXL_20260802_173246279.jpg?v=1785709355"},{"product_id":"roland-mks-20","title":"Roland Integra 7 Natural Sound Module","description":"\u003cp\u003e9\/10 condition , US Version.  With 2 expansions installed\u003c\/p\u003e","brand":"Michigan Synth Works","offers":[{"title":"Default Title","offer_id":45508542070870,"sku":null,"price":1200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/PXL_20260802_154436921.jpg?v=1785710011"},{"product_id":"360-systems-professional-midi-bass-rack","title":"360 Systems Professional MIDI Bass Rack","description":"\u003cp\u003e8\/10 condition Everything works but tacts are REALLY stiff.  I can service this for a fee but selling as is.\u003c\/p\u003e","brand":"Michigan Synth Works","offers":[{"title":"Default Title","offer_id":45508563206230,"sku":null,"price":175.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/PXL_20260802_153619115.jpg?v=1785710173"},{"product_id":"zoom-r24-usb-audio-interface-digital-multitrack-recorder-control-surface","title":"Zoom R24 USB Audio Interface \/ Digital Multitrack Recorder \/ Control Surface","description":"\u003cp\u003e9\/10 condition.  Plastic Still on display!\u003cimg\u003e\u003cimg\u003e\u003c\/p\u003e","brand":"Michigan Synth Works","offers":[{"title":"Default Title","offer_id":45508571398230,"sku":null,"price":250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/PXL_20260802_155658983.jpg?v=1785710511"},{"product_id":"roland-mks-20-clean","title":"Roland MKS-20 Clean!","description":"\u003cp\u003e9\/10 condition, US Version\u003c\/p\u003e","brand":"Michigan Synth Works","offers":[{"title":"Default Title","offer_id":45508579033174,"sku":null,"price":550.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/PXL_20260802_172823744.jpg?v=1785711060"},{"product_id":"360-systems-professional-midi-bass-rack-1","title":"360 Systems Professional MIDI Bass Rack","description":"\u003cp\u003e8\/10 Condition, buttons need a lot of force\u003c\/p\u003e","brand":"Michigan Synth Works","offers":[{"title":"Default Title","offer_id":45514703601750,"sku":null,"price":150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/PXL_20260802_154026098_f623a204-6468-40b8-b465-d09a57410042.jpg?v=1785786256"},{"product_id":"360-systems-professional-midi-bass-rack-copy","title":"Zoom R24 Multitrack Recorder","description":"\u003cp\u003e8\/10 Condition, tested working.  No storage\u003c\/p\u003e","brand":"Michigan Synth Works","offers":[{"title":"Default Title","offer_id":45514706878550,"sku":null,"price":150.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/PXL_20260802_155658983_8cf7136f-7380-4f9a-a53c-2d0d0e131d3d.jpg?v=1785786372"},{"product_id":"boss-sp-303","title":"Boss SP-303","description":"\u003cp\u003e8\/10 Condition, tested working.  Included DC adapter and 128mb Storage\u003c\/p\u003e","brand":"Michigan Synth Works","offers":[{"title":"Default Title","offer_id":45514806886486,"sku":null,"price":400.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0051\/3690\/8374\/files\/PXL_20260803_195919620.jpg?v=1785787740"}],"url":"https:\/\/michigansynthworks.com\/collections\/home-page.oembed?page=4","provider":"Michigan Synth Works","version":"1.0","type":"link"}